First-timer's Guide to Installing a New Shower Unit

Call Today

Do you find yourself trying to find information and facts on How to Build a Shower Enclosure for Your DIY Bathroom?


How to Install a One-Piece Shower Unit
A successful shower setup requires cautious preparation and also a great deal of work. In most cases, you will require to do three kinds of jobs: mounting walls, mounting the plumbing, as well as finishing walls.

Prep work


To start with, you have to pick the kind of shower that you want to set up. It is important to determine whether the selected shower is capable of managing particular systems as well as can manage a safe degree of water with the central heating boiler. A lot of shower systems nowadays are made to be adaptable to various water pressures (such as stored warm water as well as cool keys).
It is additionally important to consider the water stress and also the preparation of the piping and drainage for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The hose pipe and also spray parts of the push-on mixer shower device can be attached to the bath faucet as per your need, and also the water temperature level can be adjusted through the taps. Push-on mixers are cheap and also exceptionally simple to mount. Nevertheless, although the tube connection is basic, it is conveniently dislodged. Furthermore, it is bothersome to readjust the temperature level.

  • Bath/Shower Mixer: The hose pipe as well as spray of this kind of shower are integrated with a bathroom mixer tap, as well as the temperature level can be adjusted with the bathroom taps. It is an extremely economical alternative and also no extra plumbing is included. Nevertheless, the bath/shower mixers likewise deal with bothersome temperature level control options.

  • Handbook Mixer: The tube and also spray of a hands-on mixer shower unit are a part of the wall device as well as the hot and cold water supplies are linked to a single shutoff The temperature and also pressure of the water are regulated with either one or a range of handles (in much more costly showers). Although temperature control is much easier in hands-on mixer kinds, they are a lot more expensive than the formerly stated mixers. They additionally need added plumbing of hot and cold water system pipelines.

  • Thermostatic Mixer: The hose as well as spray of this shower type belong of the wall unit as well as the hot and cold water supplies are attached to a solitary valve here too. It is complete with an integrated stabiliser to self-adjust the water temperature as well as to stop it from ending up being too warm. One of the biggest benefits of a thermostatic mixer shower type consists of hassle-free temperature level control. Nevertheless, it is one of the most pricey of the various mixer options.

  • Power Shower: A power shower is a solitary system consisting of a powerful electric pump that is capable of altering both the water stress as well as temperature level. This sort of shower can be fitted if there is water system from a cold water tank and a warm water cyndrical tube. A power shower makes the modification of both pressure as well as temperature level simple. On the other hand, it disagrees for water warmed directly by the shower or where the water is supplied by a combination boiler under mains pressure.

  • Electric Shower: An electrical shower is plumbed right into a keys cold water supply and also it heats up the water electrically. It is essential to note that for this shower type to be set up, the keys stress needs to be at least 0.7 kg/sq cm (10lb/sq in). The device permits the temperature as well as stress to be changed by means of a handle. Versions with temperature stabilisers are better as they stay untouched by various other taps somewhere else in use within the household. A major downside of electrical showers is that the control knob only allows for the choice of high temperatures at much less stress, or lower temperatures at a better pressure. This is problematic in the winter when the spray is commonly weak and the mains water is cooler. Nonetheless, this problem is dealt with in some designs which are available with a winter/summer setting.

  • Technique


    Depending on the sort of shower you want to install, the shower head must either be fitted in order to avoid its contact with the water in the bath below or the base tray, or it should have a check valve.
    Before beginning, it is a good idea to note the placements of the shower head and also control, and also to plan the pipe-work involved. Additionally, the drain system to get rid of the drainage will certainly need to be prepared. Both positions of the cable route as well as the shower switch will also require to be taken into consideration if an immediate or electrical shower system is being mounted.
    Utilize the direction guide supplied with the shower unit to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is important to cut off the water supply. In order to shield the pipes, they should be provided a water-proof covering and likewise fitted with isolating shutoffs. The pipelines can then be buried right into the wall as well as glued over to neaten the overall look.
    Fit the base tray, shower head, and also installations.
    Attach the primary shower control to the pipelines that will be supplying the water (This might call for a women screw thread adapter).
    Reconnect the water system as well as examination the pipelines for any leakages, as some might need firm.
    If you are installing an electric shower, remember to switch off the electricity supply prior to making any type of electrical connections. When these links have been made (there should be advice within the instruction manual), the power supply can be switched back on.

    Readjusting Water Stress to Match Your Shower


    The cold water storage tank can be raised to a better elevation (occasionally as low as 150mm (6inches)) by fitting a strong wooden assistance beneath it - perhaps made up of struts and also blockboards. If you pick this alternative, the primary as well as circulation pipes will certainly also have to be raised to satisfy the new height of the reservoir.
    Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be connected right into the power supply in order to operate.

    Piping as well as Drain


    It is best to use 15mm size supply pipelines, and also make the go to the shower as short as well as straight as feasible so regarding maintain maximum pressure and reduce warm loss. Furthermore, by reducing the use of joints for pipeline edges, you can reduce the resistance in the flow of the water supply. You can accomplish this by bending the pipelines rather.

    Many Common Blunders


  • Breaching or neglecting local code limitations.

  • Utilizing pipes that are too tiny.

  • Attaching copper to galvanized without using a brass or dielectric fitting in between the two.

  • Not utilizing tape or pipe compound at threaded joints.

  • Uneven your components when installing them.

  • Not setting up an air void filling for fixtures.

  • Reducing supply stub outs also brief to set up the shutoff valves onto after the completed wall is in area.

  • Not appropriately lining up tubing right into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes is at an angle will certainly cause a leak.).

  • When transforming the water back on in your home, constantly run the outside hose pipe valve or flush your bathrooms to bleed dust and also air from the lines. This debris can trigger problems in your sink faucets as well as other plumbing trim.



  • Types Of Shower Enclosure: Which One Is Good For You?


    Showers were god made. Common waterfall was the first ever natural shower mankind used. It rinses the bathers clean from head to toe and provide an efficient way of bathing.


    Taking inspiration from nature, man designed the indoor shower. A dedicated room was built for the purpose of having a shower and was called the wet room. On the go, this became an essential space in a house.


    We have seen people equipping their bathrooms with premium showerhead, soap and toothbrush holders, elegant faucets which give a contemporary look to bathrooms. However, most people do not understand the importance of keeping the bathroom dry and do not concentrate much on shower enclosures.


    What are the advantage of using a shower enclosure?


  • To provide privacy

  • To prevent water from flooding outside the bath area

  • It makes the space more organized

  • Types of shower enclosure doors – Sliding vs Hinged; Framed vs Frameless


  • Sliding shower doors are ideal as a space saving measure for smaller sized bathrooms. They could consist of 2 or 3 panels. However, it could be more difficult to maintain and clean the sliding tracks. The sliding door could also get stuck or the tracks could get bent.

  • Hinged shower doors provide a larger opening into the wet area and ideal for large sized bathrooms. The hinges, though, could rust and the water may escape the shower door. Shower enclosure doors may also be framed or frameless.

  • Frameless shower doors appear more elegant and have a clean, premium look. Most modern homes opt for the frameless option. They are also easier to maintain. However, they are costlier compared to the framed options.

  • Framed shower doors are cheaper and have an easier installation. The frames may corrode over a period of time.

  • https://buildpro.store/blogs/ideas/4-types-of-shower-enclosure


    How to Install a One-Piece Shower Unit

    I recently found that blog post about How to Install a Freestand while scouting around the search engines. In case you enjoyed reading our blog post if you please do not forget to share it. Thanks for taking the time to read it.


    Get Quote

    Leave a Reply

    Your email address will not be published. Required fields are marked *